How To Make A Trolling Motor Mount For A Kayak

Kayaking is a sport that attracts people. The adrenaline-fueled kayaker might love to cut through big and strong waves. Alternatively, you could be a relaxed kayaker who prefers to manoeuvre the water while fishing at the same time. But the question is, how to make a trolling motor mount for a kayak? We’ve discussed each and everything for your convenience.

You might enjoy paddling your way through the water if you’re on the adventurous side of the spectrum. If, however, your interests lie in the other direction, you must have considered installing a trolling motor on your kayak at some point.

Is it attainable to mount a trolling motor on any kayak?

The answer is yes; you can attach a trolling motor to any kayak. You can do it by yourself. Once you’ve installed the trolling motor, kayaking will be a much smoother experience, and you can even spend long hours on the water. Rather than paddling all the way, enjoy the newfound peace you get with a trolling motor.

How To Make A Trolling Motor Mount For A Kayak?

When it comes to designing and building a trolling motor mount for a kayak, you are only limited by your imagination and creativity. Nonetheless, here is a simple guide to help clarify the process and provide you with a directional heading (kayak navigation pun).

Critical considerations to Buying a Trolling Motor Mount Kit:

Types of Mounts

Depending on the trolling motor you plan to use and your boat’s hull material and power capacity, there are different types of motors. You can buy a mount kit or make one yourself. You may have trouble drilling into the rubber on inflatable kayaks, so it would be best to find something attached with straps instead.

Depending on which type/power level of trolling motor will suit your needs for fishing in an open-hulled boat (with no drilled holes), choosing between buying a pre-made mounting bracket vs making your own using materials from around home is what determines how easy installation becomes when out at sea—and whether any additional work has to come later down-shore after catching fish mid-water.

Mounting a trolling motor on your kayak is relatively simple to accomplish, but you must do so in the right place. The site of your mount will often depend on what style boat you have and if there are any mounting spaces available for use. For example, many ships come with transom mounts at their rear end. At the same time, some bow-mounted models can be found as well, depending upon personal preference or availability of space within the vessel.

Compatibility

It is essential to ensure that your purchase product will be compatible with your boat and motor when buying.

For example: if you have an inflatable kayak and buy a standard yak mounting system for this purpose, then there may not be enough space (or holes) available on your vessel’s hull; or say, in contrast, someone bought their stronger-than-average powerboat some canoe attachment – despite having only two engines instead of three like they were told would work best – because they wanted “more speed” than usual… Well, let’s hope no one happens along while those owners are out at sea!

As always, when attaching anything to yaks/kayaks, BE CAREFUL AND SAFE

Dominant hand

The trolling motor will possibly be your primary tool for navigation while kayaking. To avoid accidents, place the motor on the most accessible side to control so you can steer quickly and accurately as needed.

Ergonomics

A good motor’s handle is designed so that you can keep a secure grip without having to lean too far back or unnaturally contort your wrist.

Space

When you purchase a trolling motor, it’s not just the boat and water that is needed. You will need to make room for both items in your storage space as well!

When purchasing a new trolling motor, consider stockpiling some extra space because this device comes with its battery pack too!

Depth

When the suspended carriage motor reaches a certain depth and moves the lever, the fan also moves and rotates. Therefore, the motor should be placed where there is enough room for the kayak to move freely.

Weight of a Trolling Motor

All kayaks have weight information. At 150, it works everywhere. Use your kayaks nominal weight to reduce weight, weight and equipment. The heavier the fishing motor can lift, the more weight remains. If the kayak costs 300 pounds, if the weight and equipment are 250 pounds, make sure the motor and assembly do not exceed 40 pounds. Finding the correct driver for your needs is easy. Most kayak motors are not heavy.

Battery and Longevity Considerations

Another question that might come up when deciding whether to mount a trolling motor on your kayak is what type of battery you might need, as well as how long your motor will run before it dies. The trolling motor requires a 12-volt battery with a current of around 35 amps, and it is essential to get a marine battery rather than a car battery. Like the one in your car, a typical car battery was designed to turn over the motor solely. Deep-charged batteries are required for trolling motors.

Watertight battery boxes can also be a good investment, as they will keep your batteries dry in the event of getting wet or if you fall out of your kayak and it flips over. A battery’s longevity depends on how fast and how long you use it. If you are thinking about a trolling motor that has five speeds, here is how you would describe it:

  • Full throttle, Speed 5: No breaks; you will get about 2 hours of running time.
  • 4 Speed: You should be able to run for four hours on average.
  • Speed 3: You should be able to run for about 8 hours on average.
  • 2 Speed: Approximately 12 hours of runtime.
  • Speed 1: About 16 hours of running time.

Installation

Connecting a motor to a kayak is not the easiest thing in the world. It requires a bit of drilling and manual labour to mount it and place it on the boat. On average, most fine motor mounts take about an hour to install. Especially if you need to drill a hole in your kayak. The storage grip is also very convenient for those who don’t want to drill a hole in the kayak’s body.

How to Make Your Own Motor Mount Kit

It’s cheaper to build your motor base than buying a kit, but if you are building your motor, makes sure you can check the performance of the motor to avoid damage. It is also a good idea to secure the kayak to the kayak so that it does not come loose. There is a way to create a base that you can quickly delete when you dont need it. This means you dont need to research revolutions or permanently install anything on your spaceship.

What You Need

  • One 2×4
  • Two 1x6s
  • Two ¾ inch PVC pipes
  • Securing straps, similar to this
  • Mounting plate/bracket such as this

Step 1: Measure Your Mounting Space

Before you start, it’s a good idea to measure the space allotted for your shelves. Size usually refers to the number of 2×4 and 1×6 required. Also, measure the diameter of the roller nozzle. This is because PVC pipes of different diameters may be required to ensure that they are secured.

Step 2: Cut Your Wood

Now that you know the size of the installation area, cut two 1×6 pieces to fit the room’s width. If there is more space in the tank, the 1×6 should fit snugly and not move. Depending on the boat, you may need to adjust the cut angle. 2 * 4 is slightly longer than 1 * 6 because it must be energized. It could be twice as much as 1×6.

Step 3: Cut Two Holes In One 1×6

Measure the distance between the two holes used and mark the 1×6 on the kayak deck. Make a cave to make room for a few inches of PVC pipe. If the spoon and tube are of different sizes, you will need to adjust the hole size according to your measurements.

Step 4: Join Your Planks

The next step is to join the wooden planks. Tie the 1×6 brackets at a 90-degree angle. This means that one piece is flat on the boat’s deck, and one part is vertical. Then attach the 2×4 vertically to the 1×6 piece in the same way, so the 2×4 is on one side of the edge. It is the longest part to mount the engine.

Step 5: Secure the Bracket

Install a plate or bracket to secure the connection between the 2×4 and 1×6. Doing this on both sides of the joint will help increase strength and stability. Attach a 2×4 bracket to the end of the extension to secure it to the car engine.

Step 6: Attach the PVC Pipes

After measuring correctly, attach your PVC pipes so that they are perpendicular to the 1×6 and 2×4. They should fit through the cave you made in the 1×6 a few steps ago. Secure the pipes to the rest of the mount using the straps. This can help them to stay firmly in place.

Step 7: Mount On Your Kayak

Now that we have the motor mount, we can insert the hose through the mounting hole and connect the hose to the kayak. Make sure the 1×6 is securely attached to the boat deck. In case of an accident, it can be repaired with a chain.

Best Trolling Motor Mounts For A Kayak

If this DIY project is too burdensome, buy a ready-made motorcycle. So I decided to introduce you to some of my favourite motorcycle models from famous brands!

 1. RAILBLAZA Kayak Trolling Motor Mount

RAILBLAZA Kayak Motor Mount

Another excellent solution for side applications is the Ryblaza Kayak trolling rack. The motor can handle rotating motors with loads up to 36 lbs and has all the necessary hardware for a complete installation. The motor can be adjusted by placing it on the right or left side of the kayak for easy installation. This means it can be easily removed if you use the kayak without attaching it to the fishing motor. This engine mount is also compatible with the Raiblaza Railmount 32-41 accessory. This accessory allows you to connect bars, lights, and even camera mounts to the back of your kayak seat. The bracket fits almost any kayak, but the horizontal bar is designed for boats up to 32 inches wide. This motor is compatible with most existing forklift motors as long as the thrust is less than the footprint.

Specs 

Weighs 4.8 pounds

Anodized aluminium and plastic construction

Recommended 30-lb thrust capacity

For most transom-mount trolling motors

Pros
  • Comes with mounting fasteners and StarPort HD.
  • Quick to remove and install
Cons
  • Some users complaint that they also needed extra brackets to connect the mount to the kayak.

2. Brocraft Fishing Kayak Trolling Motor Mount

Brocraft Fishing Kayak Trolling Motor Mount

Breakcrafts kayak motor protects every box. There is plenty of evidence to support motor mount. Aluminium alloy and nylon drysuits are durable and corrosion-resistant and can support up to 35 pounds of weight. A versatile, no-adjustment bracket. Tighten the clamps and tighten the straps until there are two tightening brackets. Now you are ready to go. It also has multiple adjustment points to set up different body widths, mounting angles quickly, and left and right users. How about flexibility? It may not be the cheapest kayak tour, but it’s well worth it.

Specs 

Weighs 7.9 pounds

Aluminium alloy and nylon construction

Recommended 35-lb thrust capacity

For most side-mount trolling motors

Pros
  • Accommodates different hull widths, angles, and right- or left-hand operation
  • Fits kayaks with dual rod holders
  • Includes two-rod holders
  • Secured with two tie-down straps
Cons
  • It’s not built to withstand higher speeds
  • It might not be suitable for every kayaker’s budget adjustment
  • Requires lots of adjustments and tightening before use

3. Pro controll RMIEZ010 Trolling Motor Mount

Pro Controll EZ Mount

The Pro control RMIEZ010 trolling motor mount is another tremendous universal trolling motor for boats. This motor is effortless to install and supports kayak motors up to 50lbs. No torque is required under the steering wheel. All you have to do is twist it, and the handle is a breeze. It also has an adjustable external stand for easy tool-free installation. This alone seems insufficient. It also features a quick-release buckle for easy assembly and disassembly, a large ergonomic handle, and stainless steel and fibreglass reinforced nylon hardware for strength and longevity.

Specs 

Weighs 5 pounds

Fibreglass-reinforced nylon construction

Recommended 50-lb thrust capacity

For use with a transom-mount electric motor

Pros
  • Reinforced nylon for durability.
  • Ergonomic knobs.
  • Easy to mount and dismount.
Cons
  • Difficult to get set

4. Intex Motor Mount Kit

Intex Motor Mount Kit

Would you like to kayak on an Intex boat? So, consider the Intex motor kit for your Intex body. Compatible with old and new models of Intex boats. So it works fine on Seahawk II, Mariner 400, Excursion 2, 3, 4, 5, Challenger 2, 3, 4. The base is made of marine plywood and has a thick aluminium coating for strength and durability. Thick? These actuators can power electric motors up to 3.5HP, making this unit extremely versatile.

Specs

Product Dimensions ‏ : ‎ 20 x 13.5 x 2 inches; 2.2 Pounds

Package Weight: 5. 3 lbs

Pros
  • Compatible with most Intex inflatable boats.
  • Durable
  • Attaches and detaches quickly.
Cons
  • It doesn’t come with the entire ki

Why Is It Important To Choose A Quality Motor Mount?

Kayakers who skimp on quality trolling motor mounts often end up with disastrous results. For instance, a poorly-made mount can easily slip into the water, costing you many to replace. Many people end up doing a DIY job when installing poor-quality motor mounts. Especially if you’re using them for easy navigation to rest your arms, you might find yourself in the middle of nowhere. There is a reason there are professionally made mounts since they stay firmly on the boat versus ones you make yourself.

FAQs

1. Will a transducer work on a kayak?
In general, all transducers will work on a kayak. Some transducers perform better when mounted below or to the side of the kayak. Small transducers are easier to mount inside a kayak. All transducers will work on a kayak since they can shoot through plastic or be mounted elsewhere.
2. Is it difficult to install a trolling motor on a kayak?
It is not difficult to mount a trolling motor in a kayak. If you follow some simple instructions, it’s easy! It takes just a few steps to mount a trolling motor for fishing.
3. What is the best battery to use with a trolling motor?
In most cases, trolling motor batteries fail due to improper charging. It is recommended that you use a 12-volt deep cycle marine battery with at least a 110 amp-hour rating, usually a group 27 battery. In general, the higher the amp-hour rating, the longer the run time.
4. What is the speed of a trolling motor on a kayak?
Trolling motors have a maximum speed of 5 mph, regardless of their thrust.

Conclusion

A trolling motor is an excellent addition to a kayak if you are catching fish or improving your performance on the water. Still, you’ll usually need an engine operator before considering it. Remember the grip you want. You need to power the bike and make sure the mountain fits the kayak. Not all operators work on all boats.